Velocity, airflow and temperature from one handheld. A dual 4-digit display shows two channels at once, so speed and temperature read together.
| Function | Range | Resolution | Accuracy |
|---|---|---|---|
| Air velocity, m/s | 0.40 to 10.00 m/s | 0.01 m/s | ±0.5 m/s |
| Air velocity, m/s | 10.00 to 25.00 m/s | 0.01 m/s | ±0.75 m/s |
| Air velocity, ft/min | 80 to 1965 ft/min | 1 ft/min | ±100 ft/min |
| Air velocity, ft/min | 1965 to 4900 ft/min | 1 ft/min | ±150 ft/min |
| Air flow, CMS | 0.01 to 99.99 m³/s | 0.01 | — |
| Air flow, CFM | 1 to 9999 ft³/min | 1.0 | — |
| Air temperature | 0 °C to 50 °C (32 to 122 °F) | 0.1 °C / 0.1 °F | ±0.8 °C (±1.5 °F) |
Both — airflow is a separate mode, not a conversion you do on paper.
The 925 displays air flow directly in CMS (m³/s, 0.01 to 99.99) or CFM (ft³/min, 1 to 9999), alongside velocity in m/s or ft/min. All four unit sets are switchable on the unit, and the display can show two channels at once — typically velocity and temperature, or velocity and flow.
No — the vane head is on a 1 m cable.
That separation is the reason this model works for ceiling diffusers: you hold the display at eye level and place the 70 mm vane head where the air actually is. The vane runs on low-friction ball bearings with conventional angled arms, which is the arrangement that stays stable in turbulent outlet flow.
±0.5 m/s from 0.40 to 10.00 m/s, and ±0.75 m/s from 10.00 to 25.00 m/s.
Those are absolute figures, not percentages — which matters at low speed. At 1 m/s, ±0.5 m/s is a wide band, so treat sub-1 m/s readings as indicative rather than precise. Air temperature is ±0.8 °C.
Yes, two ways.
Single-point averaging runs for up to 2 hours — useful for a slowly changing duct. Multi-point averaging stores up to 8 readings and gives you the mean, which is the usual method for a grille traverse where you take several spots across the face.
One 9 V alkaline cell, about 100 hours.
Auto-sleep kicks in after 20 minutes and can be bypassed when you are logging a slow process. Nothing exotic — a standard 9 V from any hardware store covers a full week of commissioning work.
Meter, remote vane with cord, hard carrying case, battery and manual. One-year warranty.
The hard case is included as standard, not an add-on. Optional RS232 cable and software (TM-SWA) are available separately if you need to push readings to a PC.