Plug the Fluke ii01 into your Android phone and see compressed air and gas leaks as a live sound map. With a 2–48 kHz range, 16 MEMS microphones, a 50 g body and a 2-year warranty, it turns a walk-around into a documented leak survey.
| Item | Specification |
|---|---|
| Model | Fluke ii01 (iSee™ Mobile Imaging Series) |
| Part number | 6163245 |
| UPC | 1 95112 17262 9 |
| Microphones | 16 high-precision MEMS sensors |
| Frequency band | 2 kHz to 48 kHz |
| Leak Mode | 37.5 kHz – 42.6 kHz, one-touch activation |
| Detection range | 0.5 m to >20 m (up to 50 m depending on site conditions) |
| Field of view | 50° x 38° (acoustic and visible) |
| Frame rate | 20 Hz (20 FPS nominal) |
| Sensitivity / SNR | -38 dBV / 73 dBA |
| Visible camera | 2 MP, 3x digital zoom, focus 50 cm to infinity |
| Image format | Blended visual + SoundMap™ JPG |
| Video format | Blended visual + SoundMap™ MP4, up to 5 minutes |
| Colour palettes | 3 — Grayscale, Ironbow, Blue-Red; overlay transparency 1–100% |
| dB display | Real-time centre-point dB, on/off |
| Watermark | Image or English character watermark |
| Interface | USB Type-C plug |
| OS support | Android 7.0 / HarmonyOS 2.0–4.2 (Android only, no iOS) |
| App | Fluke iSee™, free download |
| Power | Powered by smartphone, 1.2 W typical, no internal battery |
| Operating temperature | 0 °C to +40 °C (32 °F to 104 °F) |
| Storage temperature | -30 °C to +60 °C (-22 °F to 140 °F) |
| Operating humidity | 10% to 90% RH, non-condensing |
| Operating altitude | Up to 2000 m |
| Storage altitude | Up to 12000 m |
| Ingress protection | IP54 (IEC 60529) |
| Dimensions | 61 x 50 x 12 mm |
| Weight | 50 g |
| Warranty | 2 years |
| Country of origin | China |
| In the box | ii01 camera, soft protective case, quick reference guide |
No. The ii01 is Android and HarmonyOS only. It connects through a USB-C plug and requires the free Fluke iSee™ app running on Android 7.0 or HarmonyOS 2.0–4.2. There is no Lightning version, no Bluetooth pairing and no Wi-Fi fallback, so an iPhone or iPad cannot drive the camera at all. If your inspection team is split between iOS and Android, check the phone model before ordering — this is the single most common reason a unit gets returned. An Android tablet with USB-C works too, and the larger screen is genuinely easier to read on a plant walk-down.
Good to know: the phone supplies both the data link and the power, so the phone must support USB-C OTG and you need to allow the app to access the port when prompted.
No. Plug it in, open the app, and you are imaging in under a minute. The ii01 has no buttons and no power switch — the entire control surface is the phone screen. Connect the camera, launch Fluke iSee™, and the acoustic overlay appears on the live camera image. For compressed air and gas work, tap Leak Mode once and the detection band locks to 37.5–42.6 kHz, where those leaks stand out most clearly. Palette, overlay transparency and dB display are optional refinements you can learn later.
Good to know: the real skill is reading the map, not operating the app. Sweep slowly, keep the suspected joint inside the 50° x 38° field of view, and move closer when the map is ambiguous rather than turning up gain.
0.5 m to more than 20 m in normal plant conditions, with the practical limit set by leak size and background noise. Fluke quotes 0.5 m to greater than 20 m for typical sites, and up to 50 m under favourable conditions. Range is not a fixed number: it depends on the leak's acoustic energy, the ambient ultrasonic background (grinders, air blow-offs, unclogged nozzles), air movement and the angle of the surface. A large compressed-air leak on a smooth pipe can be picked up across a workshop aisle; a pinhole leak on a rough casting may need you within a metre or two.
Good to know: the ii01 does not rate leaks in cfm, litres per minute or annual cost. The centre-point dB value is a relative loudness indicator, useful for ranking one leak against another within the same survey, not an absolute flow measurement.
It has no battery of its own. Your phone powers it at about 1.2 W, so runtime equals phone runtime. There is nothing to charge on the camera and no battery to replace or dispose of. That is why it weighs only 50 g and why it can sit in a bag for months and still work the moment you plug it in. The trade-off is that a long plant survey drains the phone: for anything beyond a couple of hours, carry a power bank and expect the phone to get warm during continuous video capture.
Good to know: video clips are capped at 5 minutes each, which limits file size and keeps the phone from running hot during long recordings.
No. The ii01 locates the source of a leak; it does not measure gas concentration. This is an acoustic imaging instrument. It hears ultrasound generated by turbulent gas escaping through an orifice and shows you where that sound comes from. The dB figure on screen is relative loudness — not ppm, not %LEL, not a toxic exposure reading. For concentration, flammable range, oxygen deficiency or toxic limits you still need a calibrated gas detector, and for confined-space entry the ii01 is not a substitute for your permit-to-work instruments. What it does extremely well is cut the time spent finding the leak so the gas detector can be placed on the right spot. It also does not perform partial-discharge or electrical-corona inspection — that is a different acoustic product category.
Good to know: present it as a leak-localisation tool, not a gas safety instrument. Overstating this is the fastest route to a return and a chargeback.
Camera, soft protective case and quick reference guide, backed by a 2-year Fluke warranty. The Fluke iSee™ app is a free download, not a paid subscription. Photos are saved as blended visual plus SoundMap™ JPG files, and videos as MP4 up to 5 minutes, straight into the phone gallery. You can add a custom image or English-text watermark so every file carries the site or asset ID before it reaches a report. Three palettes (Grayscale, Ironbow, Blue-Red) and adjustable overlay transparency produce output that reads clearly on a printed page. Because the files live on the phone, sharing a leak survey with a maintenance team or a client is immediate, with no desktop software step.
Good to know: warranty is 2 years from Fluke Corporation. Ingress protection is IP54 and operating temperature is 0 °C to +40 °C, so treat it as a splash-resistant indoor and workshop instrument rather than something to leave on a rooftop in winter or use in heavy rain.